AIR CONDITIONING AMPLIFIER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LHD vehicle and RHD vehicle.

  • The procedures listed below are for the LHD vehicle.

PROCEDURE


  1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY

    B001VUT

    1. Install the air conditioner amplifier assembly with the screw.

    2. Connect the 3 connectors.

  2. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    1. Install the No. 1 air duct sub-assembly with the screw.

  3. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  5. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

    Click here

  6. INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Click here

  10. INSTALL FRONT DOOR SCUFF PLATE RH


    1. w/ Sliding Roof:

      Click here

    2. w/o Sliding Roof:

      Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  12. CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)

    Click here

  13. INITIALIZE SERVO MOTOR


    1. for Automatic Air Conditioning System:

      Click here

    2. for Manual Air Conditioning System:

      Click here