AIR CONDITIONING AMPLIFIER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LHD vehicle and RHD vehicle.

  • The procedures listed below are for the LHD vehicle.

PROCEDURE


  1. INSTALL AIR CONDITIONER AMPLIFIER ASSEMBLY

    A01X7IX

    1. Install the amplifier with the screw.

    2. Connect the connector.

  2. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  3. INSTALL NO. 3 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY (w/ Passenger Side Knee Airbag)

    Click here

  5. INSTALL LOWER INSTRUMENT PANEL (w/o Passenger Side Knee Airbag)

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  8. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Click here

  9. INSTALL FRONT DOOR SCUFF PLATE RH


    1. w/ Sliding Roof:

      Click here

    2. w/o Sliding Roof:

      Click here

  10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Passenger Side Knee Airbag)

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  11. CHECK SRS WARNING LIGHT (w/ Passenger Side Knee Airbag)

    Click here