AIR CONDITIONING PANEL(w/o Navigation System) REASSEMBLY

PROCEDURE


  1. INSTALL CONTROL KNOB SUB-ASSEMBLY


    1. Install the control knob sub-assembly.

  2. INSTALL HEATER CONTROL GUARD

    A01X748E02
    Text in Illustration
    *1 Heater Control Guard

    1. Install the heater control guard.

      Note

      Do not reuse the heater control guard after removing it.

  3. INSTALL CENTER CLUSTER MODULE CIRCUIT

    A01X9BM

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. Install new packing.

    2. Install the center cluster module circuit.

  4. INSTALL LOWER HEATER CONTROL BASE

    A01X5R6

    1. Attach the 10 claws to install the lower heater control base.

    2. Install the 2 screws.

  5. INSTALL HEATER CONTROL SUPPORT PLATE

    A01XBVP

    1. Install the heater control support plate with the 4 screws.