AIR CONDITIONING PANEL(w/ Navigation System) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. Connect the connectors.

    2. Insert the multi-media module receiver assembly and attach the 5 claws on its backside.

      Note

      When inserting the multi-media module receiver assembly, do not press the knobs on it.

    3. Install the multi-media module receiver assembly with the 2 bolts and 2 screws.

      Torque:
      for Bolt
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  2. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  7. INSTALL MULTI-DISPLAY ASSEMBLY

    Click here

  8. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  9. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  10. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.