AIR CONDITIONING PANEL(w/ Navigation System) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LHD vehicle and RHD vehicle.

  • The procedures listed below are for the LHD vehicle.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

    Click here

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE MULTI-DISPLAY ASSEMBLY

    Click here

  7. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  8. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  9. REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  10. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  11. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  12. REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

    B001WK4

    1. Remove the 2 bolts and 2 screws.

    2. B001Z9D

      Pull the multi-media module receiver assembly to detach the 5 claws on the backside of the multi-media module receiver assembly.

    3. Disconnect each connector and remove the multi-media module receiver assembly.