REAR AIR CONDITIONING PANEL REASSEMBLY

PROCEDURE


  1. INSTALL NO. 2 HEATER CONTROL SUPPORT PLATE

  2. INSTALL HEATER CONTROL KNOB


    1. A01X1AX

      Attach the 8 claws to install the heater control knob.

  3. INSTALL NO. 2 HEATER CONTROL GUARD


    1. A01WYZNE01
      Text in Illustration
      *1 No. 2 Heater Control Guard

      Install a new No. 2 heater control guard.

  4. INSTALL CENTER CLUSTER MODULE CIRCUIT

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A01X1ES

      Install the center cluster module circuit with the 2 screws.

  5. INSTALL LOWER HEATER CONTROL BASE

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A01XBEU

      Install the 3 screws.

    2. A01X2FH

      Attach the 6 claws to install the lower heater control base.