REAR AIR CONDITIONING PANEL REASSEMBLY

PROCEDURE


  1. INSTALL CENTER CLUSTER MODULE LENS


    1. A01X9EOE01
      Text in Illustration
      *1 Double-sided Tape

      Remove the double-sided tape from the control knob sub-assembly.

    2. Wipe off any tape adhesive residue with cleaner.

    3. Remove the peeling paper from a new center cluster module lens.

      Tech Tips

      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    4. Install the center cluster module lens.

      Note

      Do not reuse the center cluster module lens after removing it.

  2. INSTALL HEATER CONTROL KNOB


    1. A01X1AX

      Attach the 8 claws to install the heater control knob.

  3. INSTALL HEATER CONTROL GUARD


    1. A01WYZNE01
      Text in Illustration
      *1 Heater Control Guard

      Install a new heater control guard.

  4. INSTALL CENTER CLUSTER MODULE CIRCUIT

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A01X1ES

      Install the center cluster module circuit with the 2 screws.

  5. INSTALL LOWER HEATER CONTROL BASE

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A01XBEU

      Install the 3 screws.

    2. A01X2FH

      Attach the 6 claws to install the lower heater control base.