REAR AIR CONDITIONING PANEL DISASSEMBLY

PROCEDURE


  1. REMOVE LOWER HEATER CONTROL BASE

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A01X2FH

      Detach the 6 claws.

    2. A01XBEU

      Remove the 3 screws and lower heater control base.

  2. REMOVE CENTER CLUSTER MODULE CIRCUIT

    Note

    As the electronic parts of the circuit board may be damaged by static electricity, do not touch the electronic parts of the circuit board or the soldered areas with bare hands.


    1. A01X1ES

      Remove the 2 screws and center cluster module circuit.

  3. REMOVE NO. 2 HEATER CONTROL GUARD


    1. A01WYZNE01
      Text in Illustration
      *1 Heater Control Guard

      Remove the heater control guard.

  4. REMOVE CONTROL KNOB SUB-ASSEMBLY NO.2


    1. A01X1AX

      Detach the 8 claws and remove the heater control knob.

  5. REMOVE NO. 2 HEATER CONTROL SUPPORT PLATE