ROOM TEMPERATURE SENSOR(for Front Side) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the LHD vehicle and RHD vehicle.

  • The procedures listed below are for the LHD vehicle.

PROCEDURE


  1. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  2. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  3. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  5. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  6. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  8. REMOVE ROOM TEMPERATURE SENSOR

    A01X4VJ

    1. Disconnect the connector.

    2. Disconnect the hose and remove the sensor.