CONDENSER FAN REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT BUMPER COVER


    1. for Standard:

      Click here

    2. w/ Winch:

      Click here

  4. REMOVE SHROUD BLOWER ASSEMBLY

    B001VL3

    1. Disconnect the connector.

    2. Remove the bolt and shroud blower as shown in the illustration.