COMPRESSOR(for 1VD-FTV) DISASSEMBLY

PROCEDURE


  1. REMOVE COOLER BRACKET

    A01X5E6

    1. Detach the clamp.

    2. Remove the screw and the cooler bracket.

  2. REMOVE MAGNET CLUTCH ASSEMBLY

    A01X14AE01
    SST
    09985-00260

    1. Clamp the cooler compressor in a vise.

    2. Using SST, hold the magnet clutch hub.

    3. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

      Tech Tips

      There is no set number of magnet clutch washers since they are used for adjusting.

    4. A01X7GO

      Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

      Note

      Do not damage the seal cover of the bearing when removing the snap ring.

    5. Disconnect the connector.

    6. A01XBUD

      Using a snap ring expander, remove the snap ring and magnet clutch stator.