COMPRESSOR(for 3UR-FE) REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  3. REMOVE FRONT FENDER APRON SEAL LH

    A01X2TS

    1. Remove the 4 clips and seal.

  4. REMOVE FAN & GENERATOR V BELT

    Click here

  5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE


    1. A01X1GV

      Remove the bolt and disconnect the discharge hose from the cooler compressor.

    2. Remove the O-ring from the discharge hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  6. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A01WZ1N

      Remove the bolt and disconnect the suction hose from the cooler compressor.

    2. Remove the O-ring from the suction hose.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

  7. REMOVE COOLER COMPRESSOR ASSEMBLY


    1. A01X2LU

      Disconnect the connector.

    2. Remove the 3 bolts and nut.

    3. Remove the stud bolt and cooler compressor.