REAR NO. 2 SEAT OUTER BELT ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

    A01WZA8E02
    *1 Claw

    1. Align the claws with the seat belt positioning holes and install the retractor of the seat belt as shown in the illustration.

    2. Install the seat belt with the bolt.

      Torque:
      42 N*m  { 427 kgf*cm, 31 ft.*lbf }
    3. B001XKP

      Install the seat belt shoulder anchor with the bolt.

      Torque:
      42 N*m  { 427 kgf*cm, 31 ft.*lbf }
    4. B001Y54

      Attach the 2 claws to close the seat belt shoulder anchor cover.

  2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

    B001XME

    Tech Tips

    When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.


    1. w/o Rear Air Conditioning System:

      Connect the rear seat lock control lever cable.

    2. w/ Rear Air Conditioning System:

      Connect the thermistor connector and rear seat lock control lever cable.

    3. Attach the 18 clips and 2 claws to install the quarter trim panel.

    4. Install the clip and bolt.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }
      B001WZM
    5. A01XAD1E01
      *1 Protruding Part

      for LH Side:


      1. Install the rear No. 2 seat belt anchor LH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }

        Note

        Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.

    6. B00201O

      for RH Side:


      1. Install the rear No. 2 seat belt anchor RH with the bolt.

        Torque:
        42 N*m  { 428 kgf*cm, 31 ft.*lbf }
      2. B001W3C

        Attach the 3 claws to install the cover.

    7. B001YLX

      Install the rear No. 1 seat belt anchor with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }
    8. B001Z6R

      Attach the 3 claws to install the cover.

  3. INSTALL REAR NO. 2 SEAT COVER BEZEL

    Click here

  4. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  5. INSTALL REAR STEP COVER

    Click here

  6. INSTALL REAR FLOOR MAT REAR SUPPORT PLATE

    Click here

  7. INSTALL REAR NO. 2 SEAT ASSEMBLY


    1. Install the rear No. 2 seat assembly Click here.