REAR NO. 1 SEAT INNER BELT ASSEMBLY(for Bench Seat Type) INSTALLATION

PROCEDURE


  1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    1. A01WZLXE02
      Text in Illustration
      *1 Protruding Part

      Temporarily install the rear No. 1 seat inner belt assembly RH.

      Note

      Do not allow the anchor part of the rear No. 1 seat inner belt assembly RH to overlap the protruding parts of the rear seat.

  2. INSTALL REAR SEAT OUTER BELT ASSEMBLY


    1. A01XA05E02
      Text in Illustration
      *1 Protruding Part

      Install the rear seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear No. 1 seat outer belt assembly to overlap the protruding parts of the rear seat inner belt assembly RH.

  3. INSTALL NO. 1 SEAT INNER BELT ASSEMBLY LH


    1. A01XBFWE02
      Text in Illustration
      *1 Protruding Part

      Temporarily install the rear No. 1 seat inner belt assembly LH.

      Note

      Do not allow the anchor part of the rear No. 1 seat inner belt assembly LH to overlap the protruding parts of the rear seat.

  4. INSTALL REAR SEAT INNER BELT ASSEMBLY


    1. A01X4C4E02
      Text in Illustration
      *1 Protruding Part

      Install the rear seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat inner belt assembly to overlap the protruding parts of the rear No. 1 seat inner belt assembly LH.

    2. A01X4KHE01
      Text in Illustration
      *1 Fastener
      *2 Fastening Tape

      Close the 2 fasteners and attach the fastening tape.

  5. INSTALL FOLD SEAT STOPPER BAND ASSEMBLY

    Click here

  6. INSTALL REAR SEAT CUSHION

    Click here

  7. INSTALL REAR NO. 1 SEAT ASSEMBLY

    Click here