FRONT SEAT INNER BELT ASSEMBLY(for Bench Seat Type) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY LH (for LHD)


    1. A01X3WKE02
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      12 (RDC) - 9 (E) Seat belt unfastened Below 1 Ω
      Seat belt fastened 1 MΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly LH.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY RH (for RHD)


    1. A01X3WKE03
      Text in Illustration
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly RH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      12 (RDC) - 9 (E) Seat belt unfastened Below 1 Ω
      Seat belt fastened 1 MΩ or higher

      If the result is not as specified, replace the front seat inner belt assembly RH.