FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. for Power Seat, for 4 Way Seat Type:

      Check the buckle switch.

      A01X6WSE05
      *1 Component without harness connected: (Front Seat Inner Belt)
      *2 Connector A
      *3 Connector B
      *4 Connector C

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        B-4 - B-5 Seat belt fastened (Buckle switch is on) Below 1 Ω
        Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
        A-1 - C-4 Always Below 1 Ω
        A-2 - C-8 Always Below 1 Ω

        If the result is not as specified, replace the inner belt assembly.

    2. for 8 Way Seat Type:

      Check the buckle switch.

      A01XBQRE02
      *1 Component without harness connected: (Front Seat Inner Belt)
      *2 Connector A
      *3 Connector B
      *4 Connector C

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        C-9 - C-13 Seat belt fastened (Buckle switch is on) Below 1 Ω
        Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
        A-1 - B-4 Always Below 1 Ω
        A-2 - B-8 Always Below 1 Ω

        If the result is not as specified, replace the inner belt assembly.

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. for Power Seat, w/ Front Seat Side Airbag and Curtain Shield Airbag:

      Check the buckle switch.

      A01X9NEE03
      *1 Component without harness connected: (Front Seat Inner Belt)
      *2 Connector A
      *3 Connector B
      *4 Connector C

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        B-4 - B-5 Seat belt fastened (Buckle switch is on) Below 1 Ω
        Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
        A-1 - B-4 Seat belt fastened (Buckle switch is on) 1 MΩ or higher
        Seat belt unfastened (Buckle switch is off) Below 1 Ω
        A-1 - B-4 Always Below 1 Ω
        A-3 - B-3 Always Below 1 Ω

        If the result is not as specified, replace the inner belt assembly.

    2. for Power Seat, w/o Front Seat Side Airbag and Curtain Shield Airbag:

      Check the buckle switch.

      A01X1KXE03
      *1 Component without harness connected: (Front Seat Inner Belt)
      *2 Connector A
      *3 Connector B

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        B-4 - B-5 Seat belt fastened (Buckle switch is on) Below 1 Ω
        Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
        A-1 - B-4 Seat belt fastened (Buckle switch is on) 1 MΩ or higher
        Seat belt unfastened (Buckle switch is off) Below 1 Ω
        A-3 - B-3 Always Below 1 Ω

        If the result is not as specified, replace the inner belt assembly.

    3. for Manual Seat:

      Check the buckle switch.

      A01X80FE03
      *1 Component without harness connected: (Front Seat Inner Belt)
      *2 Connector A
      *3 Connector B

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        B-9 - B-13 Seat belt fastened (Buckle switch is on) Below 1 Ω
        Seat belt unfastened (Buckle switch is off) 1 MΩ or higher
        A-1 - B-9 Seat belt fastened (Buckle switch is on) 1 MΩ or higher
        Seat belt unfastened (Buckle switch is off) Below 1 Ω
        A-3 - B-14 Always Below 1 Ω

        If the result is not as specified, replace the inner belt assembly.