REAR NO. 2 SEAT OUTER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR NO. 2 SEAT ASSEMBLY

   
   

   1. Remove the rear No. 2 seat assembly Click here.

2. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

   Click here

3. REMOVE REAR STEP COVER

   Click here

4. REMOVE REAR DOOR SCUFF PLATE LH

   Click here

5. REMOVE REAR NO. 2 SEAT COVER BEZEL

   Click here

6. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

   

   

   Tech Tips

   When installing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.

   
   

   1. Detach the 3 claws and remove the cover.

   2. 

      Remove the bolt and disconnect the rear seat outer belt floor anchor.

   3. 

      for LH Side:

      
      

      1. Remove the bolt and disconnect the rear No. 2 seat outer belt floor anchor LH.

   4. 

      for RH Side:

      
      

      1. Detach the 3 claws and remove the cover.

      2. 

         Remove the bolt and disconnect the rear seat outer belt floor anchor RH.

   5. Remove the clip and bolt.

   6. Detach the 18 clips and 2 claws.

      

   7. w/o Rear Air Conditioning System:

      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.

   8. w/ Rear Air Conditioning System:

      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.

7. REMOVE REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

   
   

   1. 

      *1	Protective Tape

      Remove the bolt and disconnect the seat belt shoulder anchor.

      
      

      1. Using a screwdriver, detach the 2 claws and open the seat belt anchor cover as shown in the illustration.

         Tech Tips

         Tape the screwdriver tip before use.

      2. 

         Remove the bolt and seat belt shoulder anchor.

   2. 

      Remove the bolt and rear No. 2 seat outer belt.