REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE

1. REMOVE REAR NO. 1 SEAT ASSEMBLY LH

   
   

   1. Remove the rear No. 1 seat assembly Click here.

2. REMOVE SEAT ADJUSTER BOLT COVER

   Click here

3. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH

   Click here

4. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

   Click here

5. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

   Click here

6. REMOVE UPPER SEAT TRACK RAIL COVER LH

   Click here

7. REMOVE UPPER SEAT TRACK RAIL COVER RH

   Click here

8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER

   Click here

9. REMOVE REAR NO. 2 SEAT PROTECTOR

   Click here

10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

    Click here

11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    Click here

12. REMOVE SEAT BELT ANCHOR COVER CAP

    Click here

13. REMOVE REAR SEATBACK STAY COVER LH

    Click here

14. REMOVE REAR UNDER SIDE COVER LH

    Click here

15. REMOVE REAR SEAT CUSHION COVER RH

    Click here

16. REMOVE REAR SEAT UNDER TRAY LH COVER

    Click here

17. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    

    
    

    1. Remove the bolt and belt.

       Tech Tips

       The No. 1 seat 3 point type belt anchor is fixed with the same bolt as the rear No. 1 seat inner belt LH. Therefore, it becomes disconnected when the bolt is removed.

18. DISCONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH

    

    
    

    1. Disconnect the belt anchor.