REAR NO. 1 SEAT INNER BELT ASSEMBLY(for 60/40 Split Seat Type 60 Side) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

Use the same procedures for the LHD and RHD.
The procedures listed below are for the LHD.
A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE

CONNECT NO. 1 SEAT 3 POINT TYPE BELT ASSEMBLY LH
*1 Protruding Part
1. Connect the belt anchor.
  
  Note
  
  Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
*1 Protruding Part
1. Install the belt with the bolt.
  
  Torque:
  
  42 N*m { 428 kgf*cm, 31 ft.*lbf }
  
  Note
  
  Do not overlap the anchor part of the seat belt and protruding parts of the vehicle body.
  
  Tech Tips
  
  The No. 1 seat 3 point type belt anchor is fixed with the same bolt as the rear No. 1 seat inner belt LH. Therefore, connect it when installing the rear No. 1 seat inner belt LH.
INSTALL REAR SEAT UNDER TRAY COVER LH

Click here
INSTALL REAR SEAT CUSHION COVER RH

Click here
INSTALL REAR UNDER SIDE COVER LH

Click here
INSTALL REAR SEATBACK STAY COVER LH

Click here
INSTALL SEAT BELT ANCHOR COVER CAP

Click here
INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

Click here
INSTALL REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

Click here
INSTALL REAR NO. 2 SEAT PROTECTOR

Click here
INSTALL REAR NO. 2 SEAT LEG SIDE COVER

Click here
INSTALL UPPER SEAT TRACK RAIL COVER RH

Click here
INSTALL UPPER SEAT TRACK RAIL COVER LH

Click here
INSTALL REAR NO. 1 SEAT RECLINING COVER RH

Click here
INSTALL REAR NO. 1 SEAT RECLINING COVER LH

Click here
INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

Click here
INSTALL SEAT ADJUSTER BOLT COVER

Click here
INSTALL REAR NO. 1 SEAT ASSEMBLY LH
1. Install the rear No. 1 seat assembly Click here.