REAR SEAT CUSHION HEATER(for 60/40 Split Seat Type 40 Side) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE REAR NO. 1 SEAT ASSEMBLY RH


    1. Remove the rear No. 1 seat assembly Click here.

  2. REMOVE SEAT ADJUSTER BOLT COVER

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

  4. REMOVE REAR NO. 1 SEAT RECLINING COVER RH

    Click here

  5. REMOVE REAR NO. 1 SEAT RECLINING COVER LH

    Click here

  6. REMOVE UPPER SEAT TRACK RAIL COVER LH

    Click here

  7. REMOVE UPPER SEAT TRACK RAIL COVER RH

    Click here

  8. REMOVE REAR NO. 2 SEAT LEG SIDE COVER

    Click here

  9. REMOVE REAR NO. 2 SEAT PROTECTOR

    Click here

  10. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH

    Click here

  11. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH

    Click here

  12. REMOVE REAR SEAT COVER

    Click here

  13. REMOVE REAR UNDER SIDE COVER LH

    Click here

  14. REMOVE REAR SEAT UNDER TRAY COVER RH

    Click here

  15. REMOVE SEAT CUSHION COVER WITH PAD

    Click here

  16. REMOVE REAR SEPARATE TYPE SEAT CUSHION COVER

    Click here

  17. REMOVE REAR SEAT CUSHION HEATER ASSEMBLY

    B00119T

    1. Cut off the tack pins which fasten the seat heater to the seat cushion cover, and then remove the seat cushion heater from the seat cushion cover.