REAR SEATBACK HEATER(for 60/40 Split Seat Type 40 Side) INSPECTION

PROCEDURE

1. INSPECT REAR SEATBACK HEATER ASSEMBLY

   

   *1	Component without harness connected: (Rear Seatback Heater)

   
   

   1. Check the seatback heater.

      
      

      1. Measure the resistance according to the value(s) in the table below.

         Standard Resistance
         Tester Connection Condition Specified Condition 1 - 2 Seatback heater temperature 25°C (77°F) 7.51 to 8.99 Ω

         If the result is not as specified, replace the seatback heater assembly.