FRONT SEATBACK HEATER INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH


    1. Set the front seatback heater assembly LH onto the front separate type seatback cover so that the name stamp is facing the front separate type seatback pad.

    2. w/o Climate Control Seat System:

      Install the front seatback heater assembly LH to the front separate type seatback cover with new tack pins.

      A01X9YGE03
      Text in Illustration
      *1 Tack Pin *2 Front Separate Type Seatback Cover
      *3 Front Seatback Heater Assembly LH *4 Name Stamp

    3. w/ Climate Control Seat System:

      Install the front seatback heater assembly LH to the front separate type seatback cover with new tack pins.

      A01X6AKE01
      Text in Illustration
      *1 Tack Pin *2 Front Separate Type Seatback Cover
      *3 Front Seatback Heater Assembly LH *4 Name Stamp

  2. INSTALL FRONT SEPARATE TYPE SEATBACK COVER

    Click here

  3. INSTALL FRONT SEPARATE TYPE SEATBACK COVER (w/ Climate Control Seat System)

    Click here

  4. INSTALL SEATBACK COVER WITH PAD

    A01X0I7E01

    1. Attach the hooks to install the seatback cover with pad.

      Text in Illustration
      *1 Hog Ring
      *2 Hog Ring Pliers
    2. A01X4DME01
      Text in Illustration
      *1 Seatback Cover Bracket

      Attach the seatback cover bracket with the nut.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      CAUTION:

      After the seatback cover with pad is installed, make sure the seatback cover bracket is not twisted.

    3. Using hog ring pliers, install new hog rings.

      Note

      Be careful not to damage the cover.

    4. A01WZPK

      w/o Climate Control Seat System:

      Connect the connector and attach the 2 wire harness clamps.

    5. A01X842

      w/ Climate Control Seat System:

      Connect the 2 connectors and attach the 4 wire harness clamps.

  5. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  6. INSTALL SEAT CLIMATE CONTROL CONTROLLERLH (w/ Climate Control Seat System)

    Click here

  7. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  8. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  9. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  10. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  11. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  12. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  13. INSTALL FRONT SEAT ASSEMBLY LH

    Click here