CLIMATE CONTROL SEAT SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL SEAT HEATER SWITCH

    A01WZPG

    1. Attach the 2 claws to install the seat heater switch.

  2. INSTALL SUSPENSION CONTROL SWITCH


    1. A01X2Q5

      Attach the 4 claws to install the suspension control switch.

    2. A01X7Y9

      Connect the 2 connectors.

    3. Attach the wire harness clamp.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY

    Click here

  5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

    Click here

  6. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  8. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

    Click here

  9. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

    Click here

  10. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  11. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  12. INSPECT SEAT HEATER SYSTEM


    1. Check the seat heater operation.


      1. Turn the engine switch on (IG).

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.

  13. INSPECT CLIMATE CONTROL SEAT SYSTEM (w/ Climate Control Seat System)


    1. Check the climate control seat operation.


      1. When the climate control seat switch is turned on, check that the seat heater and blower operate based on the seat temperature.

      2. If the seat temperature increases as a result of the seat heater operation, check that the seat heater operation stops and the blower operation continues.

        Tech Tips

        Based on the cabin temperature, seat temperature, etc., the seat heater operation time varies.