LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH


    1. A01X1Q2

      Install the lumbar support adjuster assembly LH with the 2 screws.

    2. Connect the connector.

    3. A01X521E01
      Text in Illustration
      *1 Cable Clamp
      *2 Hook

      Attach the 4 hooks to install the seatback spring.

    4. Install the 4 springs.

    5. Connect the active headrest cable to the seatback spring with the cable clamp.

  2. INSTALL FRONT SEATBACK PROTECTOR

    Click here

  3. INSTALL SEATBACK COVER WITH PAD

    A01X2YPE01

    1. Attach the hooks to install the seatback cover with pad.

      Text in Illustration
      *1 Hog Ring
      *2 Hog Ring Pliers
    2. A01X4DME01
      Text in Illustration
      *1 Seatback Cover Bracket

      Attach the seatback cover bracket with the nut.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      CAUTION:

      After the seatback cover with pad is installed, make sure the seatback cover bracket is not twisted.

    3. Using hog ring pliers, install new hog rings.

      Note

      Be careful not to damage the cover.

    4. A01WZPK

      w/o Climate Control Seat System:

      Connect the connector and attach the 2 wire harness clamps.

    5. A01X842

      w/ Climate Control Seat System:

      Connect the 2 connectors and attach the 4 wire harness clamps.

  4. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  5. INSTALL SEAT CLIMATE CONTROL CONTROLLER LH

    Click here

  6. INSTALL NO. 2 TELEVISION BASE

    Click here

  7. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  8. INSTALL TELEVISION DISPLAY ASSEMBLY

    Click here

  9. INSTALL TELEVISION BASE

    Click here

  10. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  11. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  12. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  13. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  14. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  15. INSTALL FRONT SEAT ASSEMBLY LH

    Click here