SEAT MEMORY SWITCH(w/ Seat Position Memory System) INSPECTION

PROCEDURE


  1. INSPECT SEAT MEMORY SWITCH

    A01X5E9E01
    *1 Component without harness connected: (Seat Memory Switch)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      4 (M1) - 6 (E) 1 switch pressed Below 1 Ω
      3 (M2) - 6 (E) 2 switch pressed
      2 (M3) - 6 (E) 3 switch pressed
      5 (MRY) - 6 (E) SET switch pressed

      If the result is not as specified, replace the seat memory switch.