CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL REAR SEAT LOCK STRIKER SUB-ASSEMBLY
Install the 4 seat lock strikers with 8 bolts.
Return the floor carpet to its original position.
INSTALL NO. 3 SEAT CUSHION COVER
Attach the 16 claws and 4 clips to install the 4 seat cushion covers.
INSTALL FOLD SEAT LEG LOCK SUB-ASSEMBLY
Install the fold seat leg lock with the 2 nuts.
Attach the 2 cable clamps.
INSTALL REAR ROOF NO. 1 AIR DUCT (w/ Rear Air Conditioning System)
INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
Attach the 4 claws to install the seat lock control lever.
INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH
w/ Sliding Roof:
Install the front quarter trim panel assembly LH Click here.
w/o Sliding Roof:
Install the front quarter trim panel assembly LH Click here.
INSTALL REAR SEAT COVER CAP
INSTALL REAR FLOOR MAT REAR SUPPORT PLATE
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL REAR STEP COVER
INSTALL REAR NO. 2 SEAT ASSEMBLY
Temporarily install the seat assembly with the 4 bolts.
Note
Be careful not to damage the vehicle body.
Tighten the bolts in the order shown in the illustration.
INSTALL REAR NO. 2 SEAT HINGE COVER LH
Attach the clip and 2 claws to install the cover.
INSTALL REAR SEAT CUSHION HINGE COVER LH
Attach the 3 claws to install the cover.
Return the seat to the upright position.
INSTALL REAR NO. 2 SEAT HEADREST ASSEMBLY LH (w/ Rear Center Seat Headrest)