REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) REASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY


    1. Install the release handle with the bolt.

  2. INSTALL REAR SEATBACK LOCK STRIKER COVER LH


    1. Attach the 2 clamps to install the cover.

  3. INSTALL REAR NO. 2 SEATBACK COVER LH


    1. Attach the 3 claws to install the cover.

  4. INSTALL REAR SEATBACK LOCK STRIKER ASSEMBLY LH

    A01XAUA

    1. Install the lock striker with the 2 nuts.

      Torque:
      14 N*m  { 138 kgf*cm, 10 ft.*lbf }

  5. INSTALL REAR SEAT LOCK CONTROL CABLE

    A01X31T

    1. Attach the 2 clamps to install the lock control cable.

    2. Attach the 2 cable clamps to connect the 2 cables.

  6. INSTALL REAR INNER SEAT RECLINING COVER RH

    A01X5QU

    1. Attach the claw to install the cover.

    2. Install the screw.

  7. INSTALL REAR INNER SEAT RECLINING COVER LH


    1. Attach the claw to install the cover.

    2. Install the screw.

  8. INSTALL NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

    A01X3OSE02
    Text in Illustration
    *1 Hog Ring Pliers

    1. Using hog ring pliers, install the seatback cover to the seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  9. INSTALL SEATBACK COVER WITH PAD


    1. A01X8FP

      Using hog ring pliers, install the seatback cover with pad to the seatback frame with a new hog rings.

    2. LH Side:


      1. w/ Rear Center Seat Headrest:


        1. A01XB7Q

          Attach the 8 claws to install the 4 headrest supports.

        2. Install the rear seat protector.

        3. A01X4FS

          Insert the center headrest storage bag.

        4. A01XB87

          Attach the 2 hooks.

        5. A01X4NK

          Close the fastener.

      2. w/o Rear Center Seat Headrest:


        1. A01X2DV

          Attach the 4 claws to install the 2 headrest supports.

        2. Install the rear seat protector.

        3. A01WYWB

          Attach the hook.

    3. RH Side:


      1. A01X9UU

        Attach the 4 claws to install the 2 headrest supports.

      2. Install the rear seat protector.

      3. A01X4UH

        Attach the hook.

  10. INSTALL REAR SEAT HEADREST HANDLE


    1. Install the snap ring to the headrest handle.

    2. A01X66U

      Install the headrest handle to the headrest.

  11. INSTALL REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)

    A01X3VLE02
    Text in Illustration
    *1 Protective Tape

    1. While releasing the lock inside the headrest support with a screwdriver, install the headrest.

      Tech Tips

      Tape the screwdriver tip before use.

  12. INSTALL REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)

  13. INSTALL REAR SEAT HINGE PAWL GUIDE

    A01XBJ6

    1. Install the guide with the screw.

  14. INSTALL REAR SEAT HINGE PAWL GUIDE

    A01X1WO

    1. Attach the 5 claws to install the guide.

  15. INSTALL REAR LOWER SEATBACK LOCK BEZEL

    A01X7OA

    1. Attach the 3 claws and clip to install the seatback lock bezel.

  16. INSTALL REAR NO. 2 SEATBACK CUSHION

    A01XB05

    1. Install the seatback cushion with the screw.

  17. INSTALL NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY


    1. A01X3WN

      Attach the 2 clamps to install the 2 cables.

    2. A01X5O8

      Attach the 2 cable clamps to connect the 2 cables.

  18. INSTALL NO. 2 SEAT STAY SUB-ASSEMBLY

    A01X4P4

    1. Install the seat stay with the bolt.

  19. INSTALL NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. A01X0SOE01
      Text in Illustration
      *1 Hog Ring Pliers
      *2 Fastening Tape

      w/o Bottle Holder:


      1. Attach the fastening tape to install the seatback cover.

      2. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

        Note


        • Be careful not to damage the cover.

        • When installing the hog rings, avoid wrinkling the cover.

    2. w/ Bottle Holder:

      A01X35QE01

      1. Attach the 3 fastening tapes to install the seatback cover.

      2. Using hog ring pliers, install the seat cushion cover to the seat cushion pad with new hog rings.

        Note


        • Be careful not to damage the cover.

        • When installing the hog rings, avoid wrinkling the cover.

        Text in Illustration
        *1 Hog Ring Pliers
        *2 Fastening Tape

  20. INSTALL NO. 3 SEAT CUSHION PAD LH

  21. INSTALL SEAT CUSHION COVER WITH PAD

  22. INSTALL NO. 2 BOTTLE HOLDER


    1. A01X2PC

      Install the No. 2 bottle holder with the 2 screws.

  23. INSTALL CAP


    1. A01XBL6

      Attach the 4 claws to install the 2 caps.

  24. INSTALL REAR SEAT CUSHION CARPET

    A01XAUY

    1. Install the seat cushion carpet with new tack pins.

  25. INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

    Click here

  26. INSTALL REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)

    Click here

  27. INSTALL REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)

    Click here

  28. INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH


    1. A01X8TX

      Attach the cable clamp to connect the cable.

    2. A01XBA0

      Attach the claw to install the release lever.

    3. Install the screw.

  29. INSTALL SEAT STAND FRAME CAP

    A01X0BW

    1. Attach the 2 claws to install the stand frame cap.

  30. INSTALL REAR SEAT LOCK COVER LH

    A01X8QZ

    1. Attach the 2 clamps to install the cover.

    2. Install the 2 screws.

  31. INSTALL NO. 3 SEAT LEG COVER NO. 2

    A01XBJD

    1. Attach the 4 claws to install the cover.

    2. Install the 2 screws.

  32. INSTALL NO. 3 SEAT FRONT BRACKET COVER LH

    A01X0PN

    1. Attach the 4 claws to install the cover.

  33. INSTALL REAR SEAT CUSHION UNDER COVER LH


    1. A01X4KN

      Install the cover with the 7 screws.

    2. A01X3RU

      Attach the 16 claws.

  34. INSTALL 3RD SEAT CUSHION LOCK COVER

    A01XAZQ

    1. Attach the 4 claws to install the 2 covers.

  35. INSTALL 3RD SEAT LINK SUB-ASSEMBLY LH

    A01X8UT

    1. Install the seat link with the bolt and nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  36. INSTALL NO. 2 SEAT LEG COVER NO. 2

    A01X853

    1. Install the seat leg cover with the screw.

  37. INSTALL REAR NO. 3 SEAT LEG COVER LH


    1. A01X65R

      Install the seat leg cover with the 2 screws.

    2. A01WZ7I

      Install the spring of the seat stay ball-joint.

    3. Connect the seat stay to the seat frame.

  38. INSTALL REAR SEAT REAR BRACKET COVER REAR


    1. Attach the 2 claws to install the cover.

  39. INSTALL RECLINING ADJUSTER COVER RH

    A01X04FE02

    1. Attach the 5 claws in the order shown in the illustration to install the cover.

    2. Install the screw.

  40. INSTALL RECLINING ADJUSTER COVER LH

    A01X69PE02

    1. Attach the 3 claws in the order shown in the illustration to install the cover.

    2. Install the screw.

  41. INSTALL NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

    A01XAR9

    1. Install the release handle with the screw.

  42. INSTALL SEAT ADJUSTER BOLT COVER

    A01X9C4

    1. Attach the 2 claws to install the cover.