REAR NO. 2 SEAT ASSEMBLY(except Face to Face Seat Type) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE SEAT ADJUSTER BOLT COVER

    A01X8GCE05
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE NO. 2 RECLINING ADJUSTER RELEASE HANDLE LH

    A01XAR9

    1. Remove the screw and release handle.

  3. REMOVE RECLINING ADJUSTER COVER LH

    A01X69PE01

    1. Remove the screw.

    2. Detach the 3 claws in the order shown in the illustration, and then remove the cover.

  4. REMOVE RECLINING ADJUSTER COVER RH

    A01X04FE01

    1. Remove the screw.

    2. Detach the 5 claws in the order shown in the illustration, and then remove the cover.

  5. REMOVE REAR SEAT REAR BRACKET COVER REAR


    1. Detach the 2 claws and cover.

  6. REMOVE REAR NO. 3 SEAT LEG COVER LH


    1. A01X83Y

      Using a screwdriver, remove the spring of the seat stay ball-joint.

    2. Disconnect the seat stay.

    3. A01X65R

      Remove the 2 screws and cover.

  7. REMOVE NO. 2 SEAT LEG COVER NO. 2


    1. A01X853

      Remove the screw and seat leg cover.

  8. REMOVE 3RD SEAT LINK SUB-ASSEMBLY LH

    A01X8UT

    1. Remove the bolt, nut and seat link.

  9. REMOVE 3RD SEAT CUSHION LOCK COVER

    A01XAZQ

    1. Detach the 4 claws and remove the 2 covers.

  10. REMOVE REAR SEAT CUSHION UNDER COVER LH


    1. A01X3RU

      Detach the 16 claws.

    2. A01X4KN

      Remove the 7 screws and cover.

  11. REMOVE NO. 3 SEAT FRONT BRACKET COVER LH

    A01X0PN

    1. Detach the 4 claws and remove the cover.

  12. REMOVE NO. 3 SEAT LEG COVER NO. 2

    A01XBJD

    1. Remove the 2 screws.

    2. Detach the 4 claws and remove the cover.

  13. REMOVE REAR SEAT LOCK COVER LH

    A01X8QZ

    1. Remove the 2 screws.

    2. Detach the 2 clamps and remove the 2 covers.

  14. REMOVE SEAT STAND FRAME CAP

    A01X1FKE02
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 2 claws and remove the stand frame cap.

      Tech Tips

      Tape the screwdriver tip before use.

  15. REMOVE SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH


    1. A01XBA0

      Remove the screw.

    2. Detach the claw and remove the release lever.

    3. A01X8TX

      Detach the cable clamp and disconnect the cable.

  16. REMOVE REAR CENTER SEAT INNER BELT LH (w/ Rear Center Seat Headrest)

    Click here

  17. REMOVE REAR CENTER SEAT INNER BELT RH (w/ Rear Center Seat Headrest)

    Click here

  18. REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY

    Click here

  19. REMOVE REAR SEAT CUSHION CARPET

    A01XAUY

    1. Cut off the tack pins which fasten the seat cushion carpet to the seat cushion pad, and then remove the seat cushion carpet from the seat cushion pad.

  20. REMOVE CAP


    1. A01XBL6

      Detach the 4 claws and remove the 2 caps.

  21. REMOVE NO. 2 BOTTLE HOLDER


    1. A01X2PC

      Remove the 2 screws and No. 2 bottle holder.

  22. REMOVE SEAT CUSHION COVER WITH PAD

  23. REMOVE NO. 3 SEAT CUSHION PAD LH

  24. REMOVE NO. 3 SEAT CUSHION COVER SUB-ASSEMBLY LH


    1. w/o Bottle Holder:


      1. A01XA5AE01
        Text in Illustration
        *1 Fastening Tape

        Remove the hog rings.

      2. Detach the fastening tape and remove the seat cushion cover.

    2. w/ Bottle Holder:


      1. A01X0YLE01
        Text in Illustration
        *1 Fastening Tape

        Remove the hog rings.

      2. Detach the 3 fastening tapes and remove the seat cushion cover.

  25. REMOVE NO. 2 SEAT STAY SUB-ASSEMBLY

    A01X4P4

    1. Remove the bolt and seat stay.

  26. REMOVE NO. 3 FOLD SEAT LOCK CONTROL CABLE ASSEMBLY


    1. A01X5O8

      Detach the 2 cable clamps and disconnect the 2 cables.

    2. A01X3WN

      Detach the 2 clamps and remove the cable.

  27. REMOVE REAR NO. 2 SEATBACK CUSHION

    A01XB05

    1. Remove the screw and seatback cushion.

  28. REMOVE REAR LOWER SEATBACK LOCK BEZEL

    A01X7OA

    1. Detach the 3 claws and clip, and then remove the seatback lock bezel.

  29. REMOVE REAR SEAT HINGE PAWL GUIDE

    A01X1WO

    1. Detach the 5 claws and remove the guide.

  30. REMOVE REAR SEAT HINGE PAWL GUIDE

    A01XBJ6

    1. Remove the screw and guide.

  31. REMOVE REAR SEAT HEADREST ASSEMBLY (w/ Folding Headrest)

    A01X4XAE02
    Text in Illustration
    *1 Protective Tape

    1. While releasing the lock inside the headrest support with a screwdriver, remove the headrest.

      Tech Tips

      Tape the screwdriver tip before use.

  32. REMOVE REAR SEAT HEADREST ASSEMBLY (w/o Folding Headrest)

  33. REMOVE REAR SEAT HEADREST HANDLE

    A01X3L2

    1. Remove the snap ring and headrest handle.

  34. REMOVE SEATBACK COVER WITH PAD


    1. LH Side:


      1. w/ Rear Center Headrest:


        1. A01X2CJ

          Open the fastener.

        2. A01XB87

          Detach the 2 hooks.

        3. A01X6RB

          Pull out the center headrest storage bag.

        4. Remove the rear seat protector.

        5. A01XB7Q

          Detach the 8 claws and remove the 4 headrest supports.

      2. w/o Rear Center Headrest:


        1. A01WYWB

          Detach the hook.

        2. Remove the rear seat protector.

        3. A01X2DV

          Detach the 4 claws and remove the 2 headrest supports.

    2. RH Side:


      1. A01X4UH

        Detach the hook.

      2. Remove the rear seat protector.

      3. A01X9UU

        Detach the 4 claws and remove the 2 headrest supports.

    3. A01X8FP

      Remove the hog ring and seatback cover with pad.

  35. REMOVE NO. 3 SEATBACK COVER SUB-ASSEMBLY LH

    A01X99L

    1. Remove the hog rings and seatback cover.

  36. REMOVE REAR INNER SEAT RECLINING COVER LH

    A01X5QU

    1. Remove the screw.

    2. Detach the claw and remove the cover.

  37. REMOVE REAR INNER SEAT RECLINING COVER RH


    1. Remove the screw.

    2. Detach the claw and remove the cover.

  38. REMOVE REAR SEAT LOCK CONTROL CABLE

    A01X31T

    1. Detach the 2 cable clamps and disconnect the 2 cables.

    2. Detach the 2 clamps and remove the lock control cable.

  39. REMOVE REAR SEATBACK LOCK STRIKER ASSEMBLY LH

    A01XAUA

    1. Remove the 2 nuts and lock striker.

  40. REMOVE REAR NO. 2 SEATBACK COVER LH


    1. Detach the 3 claws and remove the cover.

  41. REMOVE REAR SEATBACK LOCK STRIKER COVER LH


    1. Detach the 2 clamps and remove the cover.

  42. REMOVE NO. 2 SEAT RECLINING RELEASE HANDLE SUB-ASSEMBLY


    1. Remove the bolt and release handle.