REAR NO. 2 SEAT ASSEMBLY(for Face to Face Seat Type) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL REAR NO. 2 SEAT ASSEMBLY

    A01X0XJE02

    1. Temporarily install the rear No. 2 seat with the 4 bolts.

    2. Tighten the bolts in the order shown in the illustration.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. INSTALL REAR SIDE SEAT LEG PROTECTOR LH

    A01X808

    1. Attach the 2 claws to install the protector.