LUMBAR SUPPORT ADJUSTER ASSEMBLY(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (w/ Lumbar support)


    1. A01X54G

      Install the lumbar support adjuster with the 2 screws.

    2. Connect the lumbar support adjuster connector.

    3. A01XA4SE02
      *1 Cable Clamp

      Attach the 4 hooks to install the seatback spring.

    4. Connect the active headrest cable with the cable clamp.

    5. Install the 4 springs.

  2. INSTALL SEATBACK COVER WITH PAD

    Click here

  3. INSTALL FRONT SEAT HEADREST SUPPORT (w/ Active Headrest)

    Click here

  4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)

    Click here

  5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  8. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  9. INSTALL VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)

    Click here

  10. INSTALL VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)

    Click here

  11. INSTALL VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly Click here.