FRONT SEAT ASSEMBLY(for Bench Seat Type) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE SEAT ADJUSTER COVER CAP RH

    A01X8KB

    1. Remove the 2 seat adjuster cover caps.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH

    Click here

  3. REMOVE RECLINING ADJUSTER RELEASE HANDLE RH

    A01X0OGE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the claw and remove the reclining adjuster release handle RH.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD RH


    1. A01X59U

      Detach the 2 rubber bands.

    2. A01X0HU

      Remove the 2 screws.

    3. Detach the claw.

    4. Detach the 2 guides and remove the front seat cushion shield RH.

  5. REMOVE FRONT SEAT HINGE KNOB

    A01X0JH

    1. Twist the front seat hinge knob in the direction indicated by the arrow and remove it.

  6. REMOVE FRONT SEAT HINGE COVER RH

    A01X5KJ

    1. Remove the 2 screws.

    2. Detach the 2 hooks and remove the front seat hinge cover RH.

  7. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

    A01X048

    1. Remove the 2 screws.

    2. Detach the hook and remove the front seat lower cushion shield RH.

  8. REMOVE INNER SEAT BRACKET ASSEMBLY RH

    A01XAI5

    1. Remove the 4 bolts and inner seat bracket assembly RH.

  9. REMOVE SEAT ARMREST ASSEMBLY RH

    A01XC10

    1. Remove the bolt and seat armrest assembly RH.

  10. REMOVE FRONT SEAT ARMREST HOLE BOARD COVER

    A01XBYI

    1. Remove the front seat armrest hole board cover from the seat armrest assembly RH.

  11. REMOVE FRONT SEATBACK SIDE COVER SUB-ASSEMBLY RH

    A01X8PK

    1. Detach the fastening tape and open the front seatback side cover sub-assembly RH.

    2. A01XBG0

      Remove the front seatback inside pad RH.

    3. A01XAOK

      Remove the front seatback side cover sub-assembly RH.

  12. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR

    A01XBOGE01
    Text in Illustration
    *1 Cushion Edge Tab

    1. Bend out the 2 cushion edge tabs.

      Note

      Be careful not to break the cushion edge tabs.

    2. Remove the 2 front seat cushion edge protectors.

  13. REMOVE SEAT CUSHION COVER WITH PAD


    1. A01X8YKE01
      Text in Illustration
      *1 Hog Ring
      *2 Hook

      Remove the hog rings and detach the hooks.

    2. Remove the hog ring and seat cushion cover with pad.

  14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01X189

      Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

  15. REMOVE CENTER SEAT HINGE COVER

    A01X17H

    1. Remove the screw and center seat hinge cover.

  16. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

    A01X3YB

    1. Remove the screw and detach the claw.

    2. Detach the clip and remove the front seat inner cushion shield RH.

  17. REMOVE SEATBACK COVER WITH PAD


    1. A01X6K2E01
      Text in Illustration
      *1 Fastener
      *2 Hog Ring

      Open the 2 fasteners and remove the hog rings.

    2. A01WZOP

      Remove the hog rings.

    3. A01X5WP

      Detach the 2 hooks.

    4. A01X32F

      Detach the fastening tape.

    5. A01X7C0

      Detach the 4 claws and remove the 2 front seat headrest supports.

    6. Remove the seatback cover with pad.

  18. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01X7DHE01
      Text in Illustration
      *1 Hog Ring
      *2 Fastening Tape

      Remove the hog rings and detach the fastening tape, and then remove the separate type front seatback cover from the separate type front seatback pad.

  19. REMOVE FRONT SEATBACK PROTECTOR

    A01X1D9E01
    Text in Illustration
    *1 Double-sided Tape

    1. Remove the front seatback protector.

    2. Remove any remaining double-sided tape.

  20. REMOVE RECLINING ADJUSTER INSIDE COVER LH

    A01X10V

    1. Remove the screw.

    2. Detach the guide and remove the reclining adjuster inside cover LH.

  21. REMOVE RECLINING ADJUSTER INSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  22. REMOVE RECLINING ADJUSTER OUTSIDE COVER LH

    A01X1VM

    1. Remove the screw and reclining adjuster outside cover LH.

  23. REMOVE RECLINING ADJUSTER OUTSIDE COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  24. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH

    A01XB60

    1. Detach the claw and remove the front seat lower cushion shield RH.

  25. REMOVE FRONT SEAT INNER TRACK ASSEMBLY RH


    1. A01X1UP

      Using a screwdriver, detach the 2 springs and remove the seat track adjusting handle.

    2. A01X0UG

      Using a T40 "TORX" socket wrench, remove the 5 "TORX" bolts and front seat inner track assembly RH.

  26. REMOVE FRONT SEAT OUTER TRACK ASSEMBLY RH


    1. A01X9CF

      Using a T40 "TORX" socket wrench, remove the 5 "TORX" bolts and front seat outer track assembly RH together with the front seat reinforcement.