SEAT HEATER SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

PROCEDURE

1. Click here

   VEHICLE BROUGHT TO WORKSHOP

   Result
   Proceed to NEXT

   
   
   • NEXTClick here
2. Click here

   INSPECT BATTERY VOLTAGE

   
   

   1. Measure the battery voltage.

      Standard Voltage
      11 to 14 V

      If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

   2. Check the fuses and relays.

   3. Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

      Result
      Proceed to NEXT

   
   
   • NEXTClick here
3. Click here

   CHECK FOR DTC*

   
   

   1. Clear the DTCs.

      Click here

   2. Check for DTCs.

      Click here

      Result
      Result Proceed to DTCs are not output A DTCs are output B

   
   
   • AClick here
   • B

     GO TO DIAGNOSTIC TROUBLE CODE CHARTClick here

4. Click here

   PROBLEM SYMPTOMS TABLE

   
   

   1. Refer to Problem Symptoms Table.

      Click here

      Result
      Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B

   
   
   • AClick here
5. Click here

   OVERALL ANALYSIS AND TROUBLESHOOTING*

   
   

   1. Operation Check

      Click here

   2. Terminals of ECU

      Click here

   3. Data List / Active Test

      Click here

      Result
      Proceed to NEXT

   
   
   • NEXTClick here
6. Click here

   REPAIR OR REPLACE

   Result
   Proceed to NEXT

   
   
   • NEXT

     END