REAR NO. 1 SEAT ASSEMBLY(for Bench Seat Type) DISASSEMBLY

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE


  1. REMOVE REAR SEAT HEADREST ASSEMBLY

    Tech Tips

    Use the same procedure to remove the rear seat headrest assembly on the other side.


    1. Remove the rear seat headrest assembly.

  2. REMOVE RECLINING REMOTE CONTROL LEVER KNOB

    Tech Tips

    Use the same procedure to remove the reclining remote control lever knob on the other side.


    1. A01XAMW

      Remove the screw and reclining remote control lever knob.

  3. REMOVE RECLINING REMOTE CONTROL BEZEL

    Tech Tips

    Use the same procedure to remove the reclining remote control bezel on the other side.


    1. A01WZN5

      Remove the screw.

    2. Detach the hook and remove the reclining remote control bezel.

  4. REMOVE SEAT ADJUSTER COVER

    Tech Tips

    Use the same procedure to remove the seat adjuster cover on the other side.


    1. A01X5GHE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the seat adjuster cover from the No. 1 reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01WZFF

      Remove the screw and No. 1 reclining adjuster release handle LH.

  6. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE SEATBACK COVER WITH PAD

    A01X8HZE01

    1. Detach the 2 hooks and open the 2 fasteners.

      Text in Illustration
      *1 Hook
      *2 Fastener
    2. A01X9TW

      Using a clip remover, remove the 2 clips.

    3. A01X8UM

      Remove the rear seatback cover.

    4. A01XBT0

      Detach the 4 claws and remove the 2 rear seat headrest supports.

      Tech Tips

      Use the same procedure to remove the 2 rear seat headrest supports on the other side.

    5. Remove the seatback cover with pad from the rear seatback frame sub-assembly.

  8. REMOVE BENCH TYPE REAR SEATBACK COVER


    1. A01X18R

      Remove the hog rings and bench type rear seatback cover from the bench type rear seatback pad.

  9. REMOVE REAR SEAT NO. 1 RECLINING COVER LH

    A01XBWY

    1. Remove the screw.

    2. Detach the guide and remove the rear seat No. 1 reclining cover LH.

  10. REMOVE REAR SEAT NO. 1 RECLINING COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE NO. 2 SEAT ADJUSTER CONTROL CABLE ASSEMBLY

    A01X9JFE01
    Text in Illustration
    *1 Cable End - -

    1. Detach the 4 cable clamps from both sides of the rear seat reclining adjuster assembly as shown in the illustration.

    2. Disconnect the 4 cable ends from both sides of the rear seat reclining adjuster assembly as shown in the illustration.

    3. Detach the 8 cable clamps and remove the No. 2 seat adjuster control cable assembly.

  12. REMOVE REAR SEATBACK FRAME SUB-ASSEMBLY

    A01X0KB

    1. Remove the 4 bolts and rear seatback frame sub-assembly.

  13. REMOVE REAR SEAT CUSHION

    A01X1XR

    1. Remove the screw and rear seat cushion.

  14. REMOVE FOLD SEAT STOPPER BAND ASSEMBLY

    A01X65D

    1. Remove the screw and rear seat cushion together with the fold seat stopper band assembly.

  15. REMOVE REAR SEAT TURN LOCK COVER

    A01X8FZ

    1. Remove the 2 screws and rear seat turn lock cover.

  16. REMOVE SEAT CUSHION COVER WITH PAD

    A01X6M4E01
    Text in Illustration
    *1 Fastener
    *2 Fastening Tape

    1. Open the 2 fasteners and detach the fastening tape.

    2. A01XBL5E01
      Text in Illustration
      *1 Hook

      Detach the 2 hooks.

    3. Remove the hog rings and seat cushion cover with pad from the rear seat cushion frame sub-assembly.

  17. REMOVE BENCH TYPE REAR SEAT CUSHION COVER

    A01X1C3

    1. Remove the hog rings.

    2. A01X8XW

      Remove the hog rings and bench type rear seat cushion cover from the rear No. 1 seat cushion pad.

  18. REMOVE REAR SEATBACK LOCK COVER

    Tech Tips

    Use the same procedure to remove the rear seatback lock cover on the other side.


    1. A01X1RU

      Remove the 2 screws and rear seatback lock cover from the rear seat lock assembly LH.

  19. REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY LH


    1. A01X6CF

      Remove the 2 bolts and rear seat reclining adjuster assembly LH from the rear seat cushion frame sub-assembly.

  20. REMOVE REAR SEAT RECLINING ADJUSTER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  21. REMOVE REAR SEAT HINGE COVER

    Tech Tips

    Use the same procedure to remove the rear seat hinge cover on the other side.


    1. A01XBEV

      Remove the rear seat hinge cover from the rear seat reclining adjuster assembly LH.

  22. REMOVE REAR SEAT LOCK CONTROL CABLE

    A01X9N3E02
    Text in Illustration
    *1 Tension Spring *2 Cable End A
    *3 Cable End B - -

    1. Remove the 2 tension springs from both sides of the rear seat cushion frame sub-assembly as shown in the illustration.

    2. Detach the 2 cable clamps.

    3. Twist the 2 cable ends A and disconnect them from both sides of the rear seat cushion frame sub-assembly as shown in the illustration.

    4. Detach the 2 cable clamps.

    5. Twist the 2 cable ends B and disconnect them from both sides of the rear seat lock assembly as shown in the illustration.

    6. Pull out the 2 cable ends B from the 2 holes of the rear seat cushion frame sub-assembly as shown in the illustration.

    7. Detach the 2 cable clamps and remove the rear seat lock control cable from the rear seat cushion frame sub-assembly.

  23. REMOVE REAR SEAT INNER BELT ASSEMBLY

    Click here

  24. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH

    Click here

  25. REMOVE REAR SEAT LOCK ASSEMBLY LH

    A01X8MS

    1. Remove the rear seat No. 1 cushion spring.

    2. A01X9BC

      Remove the rear seat lock assembly LH from the rear seat cushion frame sub-assembly.

  26. REMOVE FOLD SEAT LOCK COLLAR

    Tech Tips

    Use the same procedure to remove the fold seat lock collar on the other side.


    1. A01X9V6

      Remove the fold seat lock collar from the rear seat lock assembly LH.

  27. REMOVE REAR SEAT OUTER BELT ASSEMBLY

    Click here

  28. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH

    Click here

  29. REMOVE REAR SEAT LOCK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  30. REMOVE REAR SEAT HINGE SUB-ASSEMBLY LH

    A01X3DL

    1. Remove the 2 E-rings.

    2. Remove the 2 rear seat hinge pins and rear seat hinge sub-assembly LH from the rear seat cushion frame sub-assembly.

  31. REMOVE REAR SEAT HINGE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  32. REMOVE REAR SEAT CUSHION SUPPORT SPRING

    Tech Tips

    Use the same procedure to remove the rear seat cushion support spring on the other side.


    1. A01X1IM

      Remove the 2 rear seat hinge set plates and rear seat cushion support spring from the rear seat cushion frame sub-assembly.

  33. REMOVE REAR SEAT CUSHION SPACER

    Tech Tips

    Use the same procedure to remove the rear seat cushion spacer on the other side.


    1. A01X95T

      Remove the rear seat cushion spacer from the rear seat cushion support spring.