PRE-CRASH SAFETY SYSTEM WARNING BUZZER INSPECTION

PROCEDURE


  1. INSPECT PRE-CRASH SAFETY CITY BUZZER


    1. A01X8Z1E02
      Text in Illustration
      *a

      Component without harness connected

      (Pre-crash Safety City Buzzer)

      Apply battery voltage and check the operation of the pre-crash safety city buzzer according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (IG1)

      Battery negative (-) → Terminal 1 (BZ)

      		 Pre-crash safety city buzzer sounds

      If the result is not as specified, replace the pre-crash safety city buzzer.