SEAT BELT CONTROL ECU(for LHD) INSTALLATION

Click here

PROCEDURE

1. Click here

   INSTALL SEAT BELT CONTROL ECU

   
   

   1. Install the seat belt control ECU to the certification ECU with the bolt.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   2. 

      Install the seat belt control ECU together with the certification ECU with the 2 nuts.

      5.5 N*m

      56 kgf*cm

      49 in.*lbf

   3. Connect the 2 connectors.

2. Click here

   INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

3. Click here

   INSTALL NO. 1 SWITCH HOLE BASE

   Click here

4. Click here

   INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (w/ Driver Side Knee Airbag)

   Click here

5. Click here

   INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (w/o Driver Side Knee Airbag)

   Click here

6. Click here

   INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

   Click here

7. Click here

   INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

8. Click here

   INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

   Click here

9. Click here

   INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

   Click here

10. Click here

    INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

11. Click here

    CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Driver Side Knee Airbag)

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

12. Click here

    CHECK SRS WARNING LIGHT (w/ Driver Side Knee Airbag)

    
    

    1. Check the SRS warning light (Click here).