REAR FLOOR AIRBAG SENSOR REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE REAR STEP COVER (w/ Sliding Roof)

    Click here

  3. REMOVE REAR STEP COVER (w/o Sliding Roof)

    Click here

  4. REMOVE REAR DOOR SCUFF PLATE LH (w/ Sliding Roof)

    Click here

  5. REMOVE REAR DOOR SCUFF PLATE LH (w/o Sliding Roof)

    Click here

  6. REMOVE REAR DOOR SCUFF PLATE RH (w/ Sliding Roof)

    Click here

  7. REMOVE REAR DOOR SCUFF PLATE RH (w/o Sliding Roof)

    Click here

  8. REMOVE REAR FLOOR AIRBAG SENSOR


    1. Fold back the floor carpet.

    2. B001Y2E

      Detach the clip and claw, and remove the cover.

    3. B001VRX

      Remove the bolt and sensor.

    4. Disconnect the connector.