SIDE AIRBAG SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH and LH.

  • The procedures listed below are the LH side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here

  3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL LH

    Click here

  4. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

    Click here

  5. REMOVE ASSIST GRIP COVER LH

    Click here

  6. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  7. REMOVE SIDE AIRBAG SENSOR


    1. B001WYU

      Disconnect the connector.

    2. Remove the bolt and side airbag sensor.