CURTAIN SHIELD AIRBAG CUTOFF SWITCH REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH and LH.

  • The procedures listed below are the LH side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  3. REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  4. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  5. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  6. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  7. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  8. REMOVE NO. 1 SWITCH HOLE BASE

    Click here

  9. REMOVE CURTAIN SHIELD AIRBAG CUTOFF SWITCH


    1. A01X0WU

      Detach the 2 claws and remove the switch.