CURTAIN SHIELD AIRBAG CUTOFF SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RH and LH.

  • The procedures listed below are the LH side.

PROCEDURE


  1. INSTALL CURTAIN SHIELD AIRBAG CUTOFF SWITCH


    1. A01X0WU

      Attach the 2 claws to install the switch.

  2. INSTALL NO. 1 SWITCH HOLE BASE

    Click here

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

    Click here

  5. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  7. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  8. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  10. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.