FRONT SEAT SIDE AIRBAG ASSEMBLY(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY LH

    CAUTION:

    Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.


    1. B001XHP

      Install the front seat airbag assembly with 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Attach the 2 clamps to connect the wire harness.

    3. B001X0A

      Attach the 5 clamps to connect the wire harness.

  2. INSTALL SEATBACK COVER WITH PAD

    Click here

  3. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  4. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH (w/ Seatback Board)

    Click here

  5. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  6. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  8. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  9. INSTALL VERTICAL SEAT ADJUSTER KNOB (for 8 Way Seat Type)

    Click here

  10. INSTALL VERTICAL ADJUSTING HANDLE LH (for 8 Way Seat Type)

    Click here

  11. INSTALL VERTICAL ADJUSTER COVER LH (for 8 Way Seat Type)

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.