FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedures for the RHD and LHD.

  • The procedures listed below are the LHD side.

PROCEDURE


  1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY


    1. B001X1QE01
      *1 for LHD:
      *2 Hook (A)
      *3 Hook (B)
      *4 for RHD:

      Attach the 5 hooks (A).

    2. Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.

    3. B001Z4CE01
      *1 for LHD:
      *2 for RHD:

      Install the 2 screws.

    4. B001X0L

      Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    5. Attach the claw and install the wire.

  2. INSTALL INSTRUMENT PANEL SAFETY PAD


    1. Install the instrument panel safety pad Click here.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT


    1. Check the SRS warning light Click here.