KNEE AIRBAG ASSEMBLY(for Front Passenger Side) INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

   
   

   1. Connect the connector.

      

      *1	for LHD:
      *2	for RHD:

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

   2. Attach the 4 claws to install the front passenger side knee airbag.

   3. Install the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Floor Under Cover)

   Click here

3. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

   Click here

4. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION

   Click here

5. INSTALL FRONT DOOR SCUFF PLATE RH

   Click here

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

7. CHECK SRS WARNING LIGHT

   
   

   1. Check the SRS warning light Click here.