FRONT SEAT SIDE AIRBAG ASSEMBLY(for Power Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY LH

    CAUTION:

    Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.


    1. B001YE3

      Install the front seat airbag assembly with 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Attach the 2 clamps to connect the wire harness.

    3. B001YSG

      Attach the 5 clamps to connect the wire harness.

  2. INSTALL SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System)

    Click here

  3. INSTALL FRONT SEATBACK PROTECTOR

    Click here

  4. INSTALL SEATBACK COVER WITH PAD

    Click here

  5. INSTALL FRONT SEAT HEADREST SUPPORT

    Click here

  6. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  7. REMOVE TELEVISION DISPLAY ASSEMBLY (w/ Rear Seat Entertainment System)

    Click here

  8. REMOVE TELEVISION BASE (w/ Rear Seat Entertainment System)

    Click here

  9. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  10. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  11. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  12. INSTALL RECLINING POWER SEAT SWITCH KNOB

    Click here

  13. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  14. INSTALL FRONT SEAT ASSEMBLY LH


    1. Install the front seat assembly LH Click here.