FRONT SEAT SIDE AIRBAG ASSEMBLY(for Power Seat) REMOVAL

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedures for LHD and RHD vehicles.

  • The procedures listed below are for LHD vehicles.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY LH


    1. Remove the front seat assembly LH Click here.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD LH

    Click here

  5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

    Click here

  6. REMOVE FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  7. REMOVE FRONT SEATBACK BOARD SUB-ASSEMBLY LH

    Click here

  8. REMOVE FRONT SEAT HEADREST SUPPORT

    Click here

  9. REMOVE SEATBACK COVER WITH PAD

    Click here

  10. REMOVE FRONT SEATBACK PROTECTOR (w/ Climate Control Seat System)

    Click here

  11. REMOVE SEAT CLIMATE CONTROL CONTROLLER LH (w/ Climate Control Seat System)

    Click here

  12. REMOVE FRONT SEAT AIRBAG ASSEMBLY LH


    1. B001YSG

      Detach the 5 clamps and disconnect the wire harness.

    2. B001YE3

      Detach the 2 clamps and disconnect the wire harness.

    3. Remove the 2 nuts and front seat airbag assembly LH.

      CAUTION:

      Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.