SPIRAL CABLE REMOVAL

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  3. REMOVE LOWER NO. 3 STEERING WHEEL COVER

    Click here

  4. REMOVE LOWER NO. 2 STEERING WHEEL COVER

    Click here

  5. REMOVE STEERING PAD

    Click here

  6. REMOVE STEERING WHEEL ASSEMBLY

    Click here

  7. REMOVE LOWER STEERING COLUMN COVER

    Click here

  8. REMOVE UPPER STEERING COLUMN COVER

    Click here

  9. REMOVE SPIRAL CABLE


    1. B001ZTK

      Disconnect the connectors from the spiral cable with steering sensor.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

    2. Detach the 3 claws and remove the spiral cable with steering sensor.

    3. A01X5H7

      Detach the 6 claws and remove the spiral cable from the steering sensor.