KNEE AIRBAG ASSEMBLY(for Driver Side) ON-VEHICLE INSPECTION

PROCEDURE

1. CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

   
   

   1. 

      Perform a diagnostic system check Click here.

   2. With the driver side knee airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag with a new one:

      Cuts, minute cracks or marked discoloration on the driver side knee airbag.

2. CHECK DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

   
   

   1. 

      Perform a diagnostic system check Click here.

   2. With the driver side knee airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the driver side knee airbag with a new one:

      
      

      • Cuts, minute cracks or marked discoloration on the driver side knee airbag.

      • Cracks or other damage to the connector.

      • Deformation or cracks on the instrument panel reinforcement.

      Note

      For removal and installation procedures of the driver side knee airbag, be sure to follow the correct procedure.