INNER REAR VIEW MIRROR INSPECTION

PROCEDURE


  1. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/o Automatic High Beam System)


    1. Check operation of the electrochromic inner mirror.

      A01X24FE01
      Text in Illustration
      *1 Black Colored Tape - -
      *a

      Component without harness connected

      Inner Rear View Mirror Assembly

      		 - -

      1. Connect the battery positive (+) lead to terminal 1(IG) and the negative (-) lead to terminal 2(E).

      2. Attach black colored tape to the forward sensor to prevent it from sensing.

      3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

        Tech Tips

        When the environment is very bright, the antiglare operation may occur immediately after the tape is applied. If the result is not as specified, replace the inner rear view mirror assembly.

  2. INSPECT INNER REAR VIEW MIRROR ASSEMBLY (w/ Automatic High Beam System)


    1. Check operation of the electrochromic inner mirror.

      A01X86AE01
      Text in Illustration
      *1 Black Colored Tape - -
      *a

      Component without harness connected

      Inner Rear View Mirror Assembly

      		 - -

      1. Connect the battery positive (+) lead to terminal 1(IG) and the negative (-) lead to terminal 2(E).

      2. Attach black colored tape to the forward sensor to prevent it from sensing.

      3. Shine an electric light on the mirror. Check that the mirror surface changes from bright to dark.

        Tech Tips

        When the environment is very bright, the antiglare operation may occur immediately after the tape is applied. If the result is not as specified, replace the inner rear view mirror assembly.