COMBINATION METER(w/o Multi-information Display) INSTALLATION

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY


    1. A01X1HP

      Connect the connectors.

    2. A01XAT0

      Install the combination meter with the 4 screws.

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01X6VR

      Attach the 9 claws to install the finish panel.

    2. A01X4MY

      Attach the 4 claws.

  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH


    1. w/ Entry and Start System:

      Click here

    2. w/o Entry and Start System:

      Click here

  5. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  6. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note


    • Reset the Autoaway/Return function setting to the previous condition by changing the customize parameter Click here.

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.