COMBINATION METER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL COMBINATION METER ASSEMBLY

    A01X464

    1. Connect the connectors.

    2. Install the combination meter assembly with the 4 screws.

  2. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    A01X92Z

    1. Connect the connectors.

    2. Attach the 9 claws to install the No. 2 instrument cluster finish panel sub-assembly.

    3. A01X61H

      Attach the 4 claws.

  3. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

    Click here

  5. INSTALL LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

    Click here

  6. INSTALL NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

    Click here

  7. ENABLE AUTOAWAY/RETURN FUNCTION (for Power Tilt and Power Telescopic Steering Column)


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.