METER / GAUGE SYSTEM Fuel Receiver Gauge Malfunction

DESCRIPTION

The fuel sender gauge has a variable resistance mechanism. The resistance decreases when the fuel amount increases, and the resistance increases when the fuel amount decreases. The fuel receiver gauge changes based on the resistance of the fuel sender gauge.

PROCEDURE

1. Click here

   CHECK FOR DTC

   
   

   1. Check for DTCs (Click here).

      Table 1. Result

      Result	Proceed to
      DTC B1500 or B1501 is not output	A
      DTC B1500 is output	B
      DTC B1501 is output	C

   
   
   • AClick here
   • B

     GO TO DTC B1500 (Click here)

   • C

     GO TO DTC B1501 (Click here)

2. Click here

   PERFORM ACTIVE TEST USING INTELLIGENT TESTER (FUEL RECEIVER GAUGE ASSEMBLY)

   
   

   1. Operate the intelligent tester according to the steps on the display and select Active Test (Click here).

      Table 2. Combination Meter

      Tester Display	Test Part	Control Range	Diagnostic Note
      Fuel Meter Operation	Fuel receiver gauge	EMPTY, 1/2 or FULL	Perform the test with the vehicle stopped and engine idling.

      OK
      Needle indication is normal.

      Table 3. Result

      Result	Proceed to
      OK	A
      NG (w/ Multi-information Display)	B
      NG (w/o Multi-information Display)	C

   
   
   • A

     PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)

   • B

     REPLACE COMBINATION METER ASSEMBLY (Click here)

   • C

     REPLACE COMBINATION METER ASSEMBLY (Click here)